Protective Case for Raspberry Pi 7" Touch Display 2 and Raspberry Pi 5 – Compatible with Multiple 7" Screens and Supports Raspberry Pi HATs
Protective Case for Raspberry Pi 7-inch Touch Display 2 and Raspberry Pi 5 A high-quality protective case designed specifically for the Raspberry Pi 5 and the official 7-inch Raspberry Pi Touch Display 2. Thanks to its modular design and precise cutouts, it provides excellent protection, an aesthetic appearance, and easy access to all ports, including the ability to mount HATs.
Availability: brak towaru
Round AMOLED Display 1.75" 466×466 Touch Panel ESP32-S3 WiFi and BT RTC IMU Audio
ESP32-S3 Development Board with Round, 1.75-inch Touch AMOLED Display The ESP32-S3-Touch-AMOLED-1.75B is an integrated board with a built-in 1.75-inch capacitive touch AMOLED display, a power management IC, a 6-axis sensor (accelerometer and gyroscope), an RTC chip, and a low-power audio codec with echo cancellation.
Availability: brak towaru
RP2040-zero płytka zgodna z Raspberry Pi Pico
RP2040-zero płytka zgodna z Raspberry Pi Pico
Płytka z mikrokontrolerem RP2040 wyposażonym w dwurdzeniowy ARM Cortex-M0+, który pracuje z częstotliwością 133 MHz, zawiera 264 kB RAM oraz 2 MB pamięci QSPI flash. Płytka ma wbudowane przyciski Boot i Power, diodę użytkownika, złącze USB typu C do zasilania i programowania modułu oraz wyjścia GPIO , na których wyprowadzone zostały takie peryferia, jak 12-bitowe wejścia ADC, PWM, interfejs I2C, SPI oraz UART.
Availability: brak towaru
RP2350A USB host development board based on Raspberry Pi Pico RP2350A
RP2350A USB Mini - Development board with HOST USB Type A socket. A miniature and powerful Waveshare RP2350-USB-A development board based on the RP2350A microcontroller. Its dual architecture design and USB Host/Device support makes it ideal for prototyping, learning and IoT projects.
Availability: brak towaru
RPi Touch Keypad
Moduł klawiatury dotykowej - pojemnościowej dla Raspberry Pi.
Availability: brak towaru
RPLIDAR C1 Laser Triangulation Radar 12m Range
RPLIDAR C1 Laser Triangulation Radar, 12m Range
RPLIDAR C1 is an advanced laser scanner that represents a breakthrough in distance measurement and environmental scanning technology. Thanks to its compact size and impressive measurement range from 0.05m to 12m, the RPLIDAR C1 is an ideal solution for a wide range of applications, from automatic vacuum cleaners to advanced navigation systems in commercial and educational robots.
Its ability to work with various obstacles and in different environments makes it extremely versatile and invaluable in projects related to smart homes, IoT, and space exploration and mapping. Utilizing integrated next-generation distance measurement technology, the RPLIDAR C1 offers not only accuracy and precision in measurements, but also user safety due to its Class 1 laser. The rapid rotation of the laser core, powered by advanced mechanical components, enables 360° scanning with a angular resolution of 0.72° and a frequency of up to 10 Hz, resulting in detailed and dynamic spatial mapping.
The RPLIDAR C1 combines the latest technological advancements with practical utility, offering unparalleled scanning and measurement capabilities for a wide range of applications. Its advanced features, safety, and versatility make it an indispensable device for any project related to robotics, automation, and smart homes.
Availability: brak towaru
RS232 Board
RS232 communication board, SP3232 on board, 3V-5.5V, ESD enhanced, hardware flow control supported
Availability: brak towaru
RS485 Board (3.3V) MAX3485
The RS485 Board (3.3V) is an accessory board used for adding the RS485 transceiver to your application board.
Availability: brak towaru
RS485 serial server on ETH with isolation and PoE power supply
RS485 to ETH serial server with isolation and PoE power supply RS485 TO POE ETH (B) is an advanced module suitable for industrial environments that combines the functions of a serial server, Modbus gateway, MQTT gateway and RS485 to JSON conversion. The device supports power over Ethernet (PoE) and features power and signal isolation for enhanced security in industrial applications. The compact rail-mount housing and ease of installation make the product ideal for collecting data from RS485 devices and for monitoring smart instruments.
Availability: brak towaru
RTC Battery 64mAh for Raspberry Pi 5
RTC Battery 64mAh for Raspberry Pi 5
The RTC-BATTERY-B with a capacity of 64mAh is a stable power source designed specifically for the Raspberry Pi system, intended for uninterrupted power supply to the real-time clock (RTC). With compact dimensions (diameter 20.2mm, thickness 3.3mm) and a 2PIN JST connector, this battery perfectly complements the Raspberry Pi design, offering easy integration while minimizing impact on the workspace. The use of ML2032 type battery ensures not only sufficient capacity but also stability and long-term operation, which is crucial in applications requiring continuous system operation.
Availability: >10
Dispatched within: 24 - 48 godzin
S29GL128P NorFlash Board
The S29GL128P NorFlash Board is a development solution for NorFlash memory with 16-bit parallel interface.
Availability: brak towaru
Serial Bus Servo Driver Board (A) for ST/SC Series Servos - USB/UART
Serial Bus Servo Driver Board (A) - Controller for ST SC Serial Bus Servos
Availability: >5
Dispatched within: 24 - 48 godzin
SL811 USB Board
The SL811 USB Board is an accessory board that features a USB Host/Slave controller SL811, USB Type A receptacle, and pinheaders connected to control interface.
Availability: brak towaru
SMA to IPEX1 Adapter 15cm
IPEX1 to SMA Connector Adapter. The IPEX connector is used in some modules with ESP32, ESP8266, and GSM modules, e.g., SIM900. The SMA connector is a connector used for connecting antennas, e.g., in WiFi routers.
Availability: brak towaru
SN65HVD230 CAN Board
The SN65HVD230 CAN Board is an accessory board features an onboard CAN transceiver SN65HVD230, which is pinout compatible with PCA82C250.
Availability: brak towaru
Solar Power Management Module for 6-24V Panels
Solar Power Management Module for 6-24V Panels
A solar power management module designed for 6V~24V solar panels is an innovative solution for those seeking an efficient and safe way to utilize solar energy. With the capability to charge a 3.7V Li-Ion battery through a solar panel or Type-C connection, this module is an ideal solution for eco-friendly projects, low-voltage IoT projects, and other environmentally conscious initiatives. Equipped with Maximum Power Point Tracking (MPPT), the module maximizes the efficiency of the solar panel, resulting in increased charging efficiency. Additionally, with multiple protection circuits, the device ensures stability and safety of use, protecting against overcharging, over-discharging, reverse polarity, overheating, and overload.
Availability: brak towaru
Solar System Controller Module with Solar Energy Management Module 6V ~ 24V
The Solar System Controller Module with Solar Energy Management Module is the perfect solution for those looking for an efficient way to charge batteries using solar energy. The module is designed to provide optimum performance and maximum efficiency. With support for MPPT (maximum power point tracking) technology, the module automatically adjusts the panel load to maximise power output. It can be used with panels with input voltages from 6V to 24V and offers a 5V output with 1A capacity. The module is capable of charging 3.7V Li batteries both from the solar panel and via a USB port. It has a number of protections, such as against overcharging, over-discharge, reverse connection, over-heating and over-current, making the use of the module safe and reliable. The module also has built-in LED indicators to monitor its operation and state of charge.
Availability: brak towaru
STM32F429IGT6 MCU core board
Core429I is an STM32 MCU core board designed for STM32F429IGT6, supports further expansion. It is ideal for starting application development with STM32F family.
Availability: brak towaru
SX1262 LoRa Data Transfer Unit (DTU) 850 ~ 930MHz DIN Rail – RS232/RS485/RS422 to LoRa
The SX1262-LoRa-DTU wireless data transfer module is designed for DIN rail mounting, based on the SX1262 chip. It enables the conversion of communication from RS232, RS485, and RS422 interfaces to the wireless LoRa standard. LoRa technology provides high anti-interference capability and a long transmission range (up to 5 km)
Availability: brak towaru
Test Socket & Programming Adapter for QFN44 MLF44 MLP44 package
Enplas IC Test Socket & Programming Adapter for QFN44 MLF44 MLP44 package
Availability: brak towaru