The ESP32-P4-WIFI6-Touch-LCD-7B is a high-performance development board based on the ESP32-P4 chip with an integrated RISC-V 32-bit dual-core processor and an additional ESP32-C6 module supporting Wi-Fi 6 and Bluetooth 5. It features a 7-inch touch screen with 1024×600 resolution, rich HMI interfaces (including MIPI-CSI with ISP), and USB OTG 2.0 HS support.

ESP32-P4-WIFI6-Touch-LCD-4.3 is an advanced development board featuring a RISC-V processor, a 4.3" IPS screen, and modern Wi-Fi 6 and Bluetooth 5 connectivity. Equipped with MIPI camera and display interfaces, an audio codec, and USB OTG ports, it serves as an ideal platform for building interactive HMI panels and IoT systems.

The ESP32-S3-Touch-LCD-3.5 development board features a 3.5-inch capacitive IPS display, power management IC, 6-axis sensor (accelerometer and gyroscope), RTC, and audio codec. Ideal for rapid prototyping and integration into end products, it also offers integrated audio input and output for AI interaction and voice control.

ESP32-S3 Development Board with 3.5-inch IPS Touch Display The ESP32-S3-Touch-LCD-3.5 is an integrated MCU board designed by Waveshare. It features a 3.5-inch capacitive IPS touch display, a power management IC, a 6-axis sensor (accelerometer and gyroscope), an RTC chip, and an audio codec, facilitating rapid development and integration into target products.

Waveshare development board based on the ESP32-S3R8 chip. Equipped with a panoramic 3.49-inch IPS touch display with a resolution of 172×640. The module integrates a range of functions essential for modern IoT projects: Wi-Fi and Bluetooth communication, a 6-axis IMU sensor, an RTC clock, and an advanced audio system with two microphones and noise reduction, ideal for AI applications and voice control.

Compact development board based on the ESP32-S3 chip, equipped with a bright and high-contrast capacitive touchscreen AMOLED 2,16 inch. The module integrates advanced wireless Wi-Fi and Bluetooth 5 capabilities, a built-in 6-axis IMU sensor, a battery power management system, and a dual microphone array. An ideal solution for Smart Home projects and HMI panels.

Efficient development board with a microcontroller ESP32-S3 and an integrated 7-inch capacitive touchscreen (1024×600 px). The module offers built-in Wi-Fi and Bluetooth 5 wireless connectivity, as well as hardware support for industrial CAN and RS485 interfaces. The board will successfully handle complex GUI programs (e.g., LVGL), proving perfect as a base for modern HMI control panels in IoT projects.

The ESP32-S3 ETH Development Board is a high-performance development board featuring the ESP32-S3R8 chip, an RJ45 Ethernet port 10/100Mb/s, and Wi-Fi and Bluetooth 5 connectivity. It offers 8MB of PSRAM, 16MB of Flash, a camera connector, a TF card slot, and Pico Header compatibility. It is suitable for IoT projects, smart home applications, monitoring, and image acquisition-based systems.

ESP32-S3-Touch-LCD-4.3B-BOX is an advanced development board with a dual-core Xtensa 32-bit LX7 processor, supporting 2.4GHz WiFi and Bluetooth 5, ideal for IoT, smart home, and HMI projects. Equipped with a 4.3-inch touch screen with 800×480 pixel resolution, it enables smooth operation of graphical interfaces. It features 8MB Flash and 8MB PSRAM, as well as numerous connectors, including CAN, RS485, I2C, and isolated I/O, providing wide application possibilities.

The ESP32-S3-LCD-7 is a powerful development board featuring a 7-inch screen with an 800×480 resolution. Equipped with 2.4 GHz WiFi, Bluetooth 5, 8 MB Flash, and PSRAM, it is perfectly suited for IoT and HMI projects. It supports various interfaces: CAN, I2C, RS485, and Micro SD. It includes a built-in battery charging circuit, USB ports, and GPIO connectors for sensors and peripheral devices.

The ESP32-S3 POE ETH Development Board is a high-performance development board featuring the ESP32-S3R8 chip, an RJ45 Ethernet port with 10/100 Mbps, Wi-Fi and Bluetooth 5 connectivity, and an included PoE module. It offers 8 MB of PSRAM, 16 MB of Flash, a camera connector, a TF slot, and Pico Header compatibility. It is suitable for IoT projects, smart home applications, monitoring, and image acquisition-based systems.

The ESP32-S3-LCD-1.3 is a board with a 1.3" color LCD (262K colors), a lithium battery charging management circuit, a 6-axis sensor (accelerometer and gyroscope), and a Wi-Fi / Bluetooth antenna.

ESP32-S3-GEEK Developer Board with 1.14" 240x135 Display

The ESP32-S3-GEEK Developer Board, created by Waveshare, is an advanced tool for electronics enthusiasts, enabling the realization of IoT projects with high efficiency and flexibility. Onboard is the ESP32-S3R2 chip with a dual-core Xtensa® LX7 processor, running at up to 240 MHz, providing the computational power necessary to handle complex tasks. Complementing it is a 1.14-inch color LCD IPS screen, offering a clear image at a resolution of 240×135 pixels, significantly enhancing user interaction with the device. The board supports wireless communication via 2.4GHz WiFi and Bluetooth Low Energy 5.0, opening up broad possibilities for creating connected systems. Integrated 16MB Flash and 2MB PSRAM along with I2C, UART, and GPIO ports provide sufficient memory and versatility in connecting external modules and sensors, allowing for quick and efficient project implementation. Designed with ease of use in mind, the ESP32-S3-GEEK provides a rich set of developer tools and online resources to facilitate learning and development. It's an ideal platform for those looking to experiment with new ideas or develop advanced projects in smart home, automation, or wireless communication devices. With its open architecture and community support, ESP32-S3-GEEK is an excellent choice for anyone seeking a flexible and powerful development platform.

ESP32-S3-LCD-1.28 Development Board with Dual-Core Xtensa Processor and 1.28" Circular Display

The ESP32-S3-LCD-1.28 development board is a highly efficient, cost-effective microcontroller module designed by Waveshare, which provides an ideal solution for electronics enthusiasts, IoT developers, and smart device designers. Equipped with a 1.28-inch LCD screen, a lithium battery charging circuit, and peripherals such as a six-axis sensor (three-axis accelerometer and three-axis gyroscope), this board is based on the integrated ESP32-S3R2 chip. The SoC provides low power consumption while offering Wi-Fi and BLE5.0 capabilities, making it a perfect choice for mobile applications, wearable electronics, smart homes, and other IoT scenarios. Additionally, the board comes with 16MB external Flash memory and 2MB PSRAM, enhancing its capabilities and performance.

STM32 development board, STM32F407IGT6, USB HS/FS, Ethernet, NandFlash, JTAG/SWD, LCD, USB TO UART

Flexible FFC (Flat Flexible Cable) with a length of 1 meter, ideal for creating your own HDMI cables. It features EMI shielding for more stable transmission and gold-plated/tinned contacts that ensure resistance to oxidation and operation in complex environments.

The FT232 USB UART Board (Type A) is an accessory board that features a USB-to-UART serial convertor FT232, USB Type A connector, and 3 LEDs: TXD LED, RXD LED, POWER LED.

USB to parallel FIFO interface with USB mini-AB connector

The Raspberry Pi HAT module with SIM868 GSM GPRS Bluetooth is the perfect solution for Raspberry Pi owners who need the ability to communicate via GSM, Bluetooth and use a GPS: GNSS receiver.

Hat dla Raspberry Pi odbiornikiem GPS MAX-M8Q obsługującym systemy pozycjonowania: GPS, Beidou, Galileo i GLONASS. Na płytce modułu znajduje się również adaper umożliwiający komunikacje za pomocą USB oraz konwerter napięcia zapewniający zgodność modułu z systemami zasilanymi napięciem 5V np. Arduino.

Reliable, 8-channel Ethernet relay module by Waveshare enclosed in a DIN rail housing. The device allows for remote relay control using Modbus RTU/TCP and MQTT protocols. It supports a wide power supply range of 7-36V and power over PoE (IEEE 802.3af).

Professional ESP32-S3 industrial controller equipped with 8 DI/DO channels, PoE Ethernet support, RS485, and CAN. The device in a DIN rail enclosure offers full signal isolation, RTC, and a wide power supply range, making it ideal for professional automation and IoT monitoring systems.

The ESP32-S3-RS485-CAN is a high-performance industrial controller equipped with isolated RS485 and CAN ports and a wide-range power supply of 7-36V. The DIN rail-mounted device offers full circuit protection, an RTC module, and Wi-Fi/Bluetooth connectivity, making it ideal for professional IoT automation.

Industrial Four-Channel USB to RS485 Converter

USB TO 4CH RS485 (B) Converter is a modern industrial device designed to convert signals from USB to RS485, crucial for automation and monitoring systems. Utilizing the innovative CH344L chip, it provides fast, stable, and reliable communication between devices. Its unique features include advanced protective circuits: built-in power isolation, ADI magnetic isolation, and TVS modules, which together protect against surges and electromagnetic interference, ensuring a high level of operational safety.

Aluminum housing enhances the durability of the device, and thanks to its compact form and ability to be wall-mounted or DIN rail mounted, the converter is easy to install, which is crucial in industrial applications. The versatility of this device makes it ideal for various industrial applications where reliable data transmission is required. The converter is easy to use with automatic transmission control and is compatible with various operating systems, facilitating integration with existing systems.

Additional features such as self-regenerating fuses and built-in RS485 terminating resistor 120R increase its functionality and adaptability to specific installation needs.

Industrial module offering 4 independent PWM output channels, controlled via the RS485 interface using the Modbus RTU protocol. Equipped with dual power and signal isolation as well as built-in hardware protections. The device supports a wide supply voltage range and is housed in an enclosure designed for DIN rail mounting.

Industrial RS232/485 to Ethernet and WiFi converter with PoE power supply

Hub with 4 USB ports compatible with USB 2.0 and 1.1. Inside is an industrial HUB chip with STT technology, which ensures stable and smooth simultaneous connections of four USB devices. For safety, each USB port is equipped with ESD protection to protect against damage caused by surges and potential data loss. The product also features surge protection, which effectively protects connected devices from damage by other high voltage sources. It features multiple protection circuits, including overvoltage, overcurrent, short circuit, overtemperature, reverse current, under-voltage, and has 8KV ESD and filtering protection. For easy monitoring of operational status, the hub is equipped with LEDs indicating the status of the power supply and USB ports. The whole unit is enclosed in an industrial metal housing, which is not only robust and durable, but also equipped with mounting holes for easy installation. Ideal for professionals looking for a reliable solution.

Industrial bi-directional USB to RS485 converter module with original CH343G and SP485EEN inside. It has built-in protection circuits such as an anti-shock circuit, resettable fuse, ESD protection and TVS diode, etc. It is small yet fast and reliable. With fast communication, stability, reliability and safety, it is the ideal choice for industrial control equipment and/or applications with high communication requirements.

Industrial USB to 4CH RS485/422 Converter, FT4232HL The USB to 4CH RS485/422 converter is an advanced industrial device that enables the conversion of USB to RS485/422 signals with full isolation.

Industrial USB to TTL converter TheUSB to TTL (D) converter is a device that enables the connection of a USB connector from a PC or other devices to devices with TTL logic level

Industrial WiFi 6-channel ESP32-S3 relay module with Bluetooth, RS485 The ESP32-S3 industrial WiFi 6-channel relay module is an advanced solution for IoT and industrial automation applications. Featuring the ESP32-S3 microcontroller with a dual-core Xtensa 32-bit LX7 pro